Fast, secure access to information drives how people get things done. From financial data to patient information to homeland security to enterprise services, there’s no time for network downtime. That’s why Tellabs Services offers a variety of technical support agreement options to meet the specific needs of your organization’s network.

The Tellabs ® 8630 Smart Router is similar to the Tellabs 8660 router but with a more compact form factor. Following the same cost-efficient architecture and full redundancy options as the Tellabs 8660 router, the Tellabs 8630 router has been specifically designed to offer the functionality needed in mobile networks and its optimized size makes it ideal for use in operator sites with limited. 81.5320L FP 7.1.1USPIM Tellabs 5320L/LS Service Option I (on Micro-FLASH) Ordering and Availability. Tellabs 5320L/S Digital Cross-Connect FP 7.1.1 was released in. For more detailed information, please contact your. Tellabs sales representative or local Tellabs sales office. One Tellabs Center. Tier 3 support utilizing internal and external resources including manuals and vendor support. Sycamore SN 3000/16000, NEC ITS2400V, OME 6500, Tellabs 5320L, Tellabs 5500, Tellabs 6500. Sprint / Ericsson January 2007 to January 2010 Network Analyst/Designer. Telephone Collectors International was incorporated under the laws of the state of Kansas on May 13, 1986. The goal of the organization is 'to educate the public, as well as the members of the Corporation, regarding the history of telephony, the value of old telephones and related items, their collectability and preservation; to research telephone history and publish and provide literature.

Fci 7100 series programming manual. Manual ingersoll rand ts3a dryer. Operators manual for mahindra max tractor. Respironics service manual cofflator. Tellabs 5320l manual. Renault megane grandtour service manual. Bobcat concrete drop hammer maintenance manual. Quick reference guide for revit architecture 2016. Fg wilson troubleshooting manual.

Tellabs Network

Support Services

Tellabs Technical Support Agreement packages provide ongoing support services to keep your network performing at peak levels. Select the option that works best for you. Higher-level packages include all the network support services in the package beneath them in the diagram.

TAC (Technical Assistance Center) Support

Whether you need TAC support, on-site assistance or Network Performance Auditing, Tellabs has a team of technical assistance experts available to incorporate equipment from multiple vendors and multiple technologies 24×7, so you can be assured that your network is maintained and performing at its maximum performance.

Tellabs 5320l Manual Pdf

• Two circuits per card, each able to support 2- or 4-wire operation
• 2- or 4-wire FXO
• 2- and 4-wire FXS
• 2- and 4-wire ETO
• 2- and 4-wire PLAR

• 2- and 4-wire DID
• Equalization
• Gain transfer
• Normal or reverse simplex
• Loop start or ground start

More Choices

Also available in the 4-wire mode is selectable normal or reversed simplex signaling. In both 2-wire and 4-wire interfaces,provisionable wide-range gain/attenuation settings are provided. For ETO mode, both sourcing or sinking sealing current options are available when sealing current is required. Ps touch apk. The SS 2/4 card is not software upgradeable.

Signaling Modes

For all signaling modes, the Tellabs 1000 MSAP SS 2/4 plug-in card supports full equalization for 2-wire interfaces and built-in precision balancing with each equalization setting for echo cancellation over any loop. For 4-wire interfaces, post-equalization (transmit direction only) is provided. These equalization settings are available via provisionable selections for different cable configurations. Passive mismatch equalization is also available in the 4-wire mode, via selectable 150 ohm/600 ohm settings, for both transmit and receive directions.

POTS services

Connecting POTS telephones to a computer telephony system via T-1 links requires a channel bank configured with FX-type connections. Generating a call from the POTS set to the computer telephony system requires a configured FXO connection. Generating a call from the computer telephony system to the POTS set requires a configured FXS connection.

FXO and FXS services

FXO or FXS service can be ordered from telcom service providers outside the subscriber’s exchange area. With this service, a user can pick up a phone in one city and receive a dial tone and a local number from a “foreign” city. FX trunks provide the connection. Analog or T-1 links transport the signal.

• Weight: 0.5 lb (0.23 kg)
• Depth: 10.5 in (26.67 cm)
• Width: 0.563 in (1.429 cm)
• Height: 5.125 in (13.018 cm)

• External interface inputs/outputs are available via backplane wire-wrap posts of the slot where the ETI card is located.

• Relative humidity: 5%-95% noncondensing
• Operating temperature: -40 F to +149 F (-40 C to +65 C)

• Meets GR-1244-CORE filter requirements

• Current Sink Interface - End-to-end signaling delay (normal and reverse battery): < 50 ms - Wink distortion for any off wink > 50 ms: ±15 ms - On-hook interval distortion for intervals > 50 ms: ±25 ms - Maximum DC supervisory range: <= 1600 ohms - Ring Detection: < 100 ms - AC Ringing load (20 Hz): > 2.3 k ohms but < 4.0 k ohms - Nominal DC input resistance: Selectable — 500 ohms, 250 ohms - Ring Ground resistance: 600 ohms
• Signaling Types (2-wire and 4-wire) - D4 FXS, FXO, loop start and ground start - D4 DP0, D4 DPT, TR-8 DPT, TR-8 FXS - D4 PLAR, D4 FXS/PLAR, D4 PLAR D4, ETO

• Green, BUSY - Either channel is in any state other than Idle or Invalid Signaling, and no hardware failure is detected on the card
• Red, Fail - A hardware failure is detected on the card, or the card is unable to communicate with the CPU

• Craft User Interface (CUI)
• Tellabs Panorama Element Management System (EMS)

• Minimum base software FP15 and higher

• Supported in Tellabs 1000 CBA

• Open circuit voltage: < -43V
• Ring trip delay: < 150 ms
• Loop current: Typically 25 to 30 mA
• On-hook detection threshold: > 10 k ohms
• Off-hook detection threshold: < 2 k ohms
• Maximum DC supervisory range - Includes 1600 ohms maximum cable resistance plus 430 ohms for station:
• Wink distortion for any off wink > 50 ms: ±15 ms
• End-to-end signaling delay (normal and reverse battery): < 50 ms

• Line impedance, 2-wire Terminal mode (COT and RST): selectable 600 ohms + 2.16 F or 900 ohms + 2.16 F, 2-wire Cable mode (RST and COT): 900 ohms + 2.16 F, 4-wire Terminal mode: 600 ohms, 4-wire Cable mode: Selectable 150 ohms or 600 ohms for unloaded cable; fixed 1200 ohms for loaded cable
• Receive gain adjustment (from DLC), 2-wire Terminal mode: -10.0 dB to 0.0 dB, 2-wire Cable mode: +6.0 dB to –9.0 dB, 4-wire Terminal mode: -16.0 dB to +8.5 dB, 4-wire Cable mode: -9.0 dB to +6.0 dB
• Transmit gain adjustment (toward DLC), 2-wire Terminal mode: -5.0 dB to +4.5 dB, 2-wire Cable mode: 0.0 dB to +9.0 dB, 4-wire Terminal mode: -7.0 dB to +17.5 dB, – 4-wire Cable mode: -6.0 dB to +9.0 dB

• Idle channel noise - < 20 dBrnC
• Longitudinal balance - 200 Hz to 2 kHz, > 58 dB and 3 kHz, > 53 dB
• At COT with RT in Cable mode - ERL: 10 dB min and SRL: 5 dB min
• At RT with COT in Cable mode - ERL: 15 dB min and SRL: 9 dB min
• At COT with RT in Terminal mode - ERL: 22 dB min and SRL: 14 dB min
• At RT with COT in Terminal mode - ERL: 19 dB min and SRL: 11 dB min

• Mixed gauges are allowed with any combination. All loops longer than 18,000 ft must use H-88 loading. Loaded cable: Only H-88 loading is supported. Gauges of 19, 22, 24, and 26 are supported, including any gauge combinations. Maximum customer end section length including bridge taps is 9000 ft for 2-wire and 15,000 ft for 4-wire (from last load coil). No bridge taps are allowed in (or between) the loaded sections.
• Supported cable facilities - Nonloaded cable: 19, 22, 24 and 26 gauges are supported up to 18,000 ft, including bridge taps. Maximum bridge tap length is limited to 6000 ft for 2-wire and 12,000 ft for 4-wire.
• Supported cable configurations - 2-wire and 4-wire Terminal interface: up to 3,000 feet of intraoffice cable, but = 1.5 dB 1 kHz loss – 2-wire and 4-wire cable interface: maximum cable length is limited to 10 dB 1 kHz loss or 1600 ohms DC cable resistance.
• Meets GR-57-CORE requirements for attenuation distortion for supported cable configurations – 2-wire cable mode: active equalization provided in both directions of transmission – 4-wire cable mode: active postequalization in transmit direction. Passive equalization using 150 ohm mismatch also provided.

Ongoing network support services to ensure peak performance during the operation and maintenance of your network.

The right professional network services to help you successfully plan, design, install, and operate your network.

Digital versions of your Tellabs-earned training credentials that can be used in email signatures, digital resumes, and on social media sites.

Flexible network training options to educate your staff on how to expertly plan, implement, and support your network.

Tellabs 5320l Manual User

Tellabs 5320l Manual Instructions